6900 Series Deep Groove Ball Bearings

6900 Series deep groove ball bearings are thin-section bearings designed for applications where radial space is limited but reliable rotational performance is still required. Compared with standard deep groove ball bearing series, the 6900 Series has a smaller cross-section relative to its bore size, making it suitable for compact equipment and space-constrained bearing arrangements.

These bearings can accommodate radial loads as well as moderate axial loads in both directions. Their compact dimensions, low weight, and relatively low friction make them suitable for applications where reducing the overall size and weight of rotating equipment is important.

6900 Series bearings are commonly used in compact motors, fans, pumps, automation equipment, precision mechanisms, and other rotating equipment. Different open, shielded, and sealed configurations can be selected according to operating speed, lubrication requirements, contamination conditions, and the level of protection required.

6900 Series Bearing Specifications

The 6900 Series includes compact deep groove ball bearings with a relatively small cross-section compared with their bore diameter. This design allows the bearings to fit into applications where installation space is limited while still providing reliable support for rotating components.

The table below provides the main dimensional and technical specifications for selected 6900 Series bearing models, including bore diameter, outer diameter, width, minimum chamfer, ball information, load ratings, and weight. These specifications can be used as a reference when comparing bearing sizes and selecting a suitable bearing for your equipment.

For a specific application, bearing selection should also consider operating speed, radial and axial loads, temperature, lubrication, sealing requirements, installation conditions, and the expected service environment.

← Swipe to view full table

Bearing
model
d
Bore
(mm)
D
Outer Dia.
(mm)
B
Width
Minimum
chamfer rmin
(mm)
Ball
diameter
(mm)
Ball
Qty
Cr
Dynamic (KN)
Cor
Static (KN)
Weight
(kg)
open
(mm)
Shielded /
sealed (mm)
693 3 8 3 4 0.15 1.588 6 0.56 0.179 0.001
694 4 11 4 4 0.15 2 7 0.96 0.345 0.0017
695 5 13 4 4 0.2 2 8 1.08 0.43 0.0023
696 6 15 5 5 0.2 2.381 8 1.47 0.6 0.0036
697 7 17 5 5 0.3 2.381 9 1.61 0.71 0.005
698 8 19 6 6 0.3 3.175 7 2.25 0.92 0.0076
699 9 20 6 6 0.3 3.175 8 2.48 1.09 0.0085
6900 10 22 6 6 0.3 3.175 9 2.7 1.27 0.01
6901 12 24 6 6 0.3 3.5 9 3.21 1.54 0.012
6902 15 28 7 7 0.3 3.969 10 4.33 2.25 0.018
6903 17 30 7 7 0.3 3.969 11 4.6 2.55 0.019
6904 20 37 9 9 0.3 4.7625 11 6.38 3.68 0.038
6905 25 42 9 9 0.3 4.7625 13 7.01 4.55 0.044
6906 30 47 9 9 0.3 4.7625 14 7.24 5.01 0.05
6907 35 55 10 10 0.6 5.953 13 10.4 7.17 0.075
6908 40 62 12 12 0.6 6.747 14 13.69 9.91 0.118
6909 45 68 12 12 0.6 6.747 14 13.48 10.41 0.128
6910 50 72 12 12 0.6 6.747 15 13.92 10.98 0.133
6911 55 80 13 13 1 6.747 17 14.82 12.69 0.18
6912 60 85 13 13 1 6.747 18 15.17 13.49 0.193
6913 65 90 13 13 1 7.144 19 17.39 15.98 0.206
6914 70 100 16 16 1 8.731 17 23.7 21.15 0.334
6915 75 105 16 16 1 8.731 18 24.33 22.55 0.355
6916 80 110 16 16 1 8.731 19 24.95 23.87 0.373
6917 85 120 18 18 1.1 10.319 17 31.89 29.65 0.536
6918 90 125 18 18 1.1 10.319 18 32.8 31.51 0.554
6919 95 130 18 18 1.1 10.319 19 33.68 33.35 0.58
6920 100 140 20 20 1.1 12.303 17 43.93 42.01 0.785

About 6900 Series Bearings

6900 Series bearings are thin-section deep groove ball bearings designed for applications where limited radial space, reduced weight, and reliable rotational performance are important. Compared with standard deep groove ball bearing series with larger cross-sections, the 6900 Series provides a compact bearing arrangement while maintaining the basic characteristics of a deep groove ball bearing.

The compact design makes 6900 Series bearings suitable for equipment where installation space is restricted but reliable radial and axial load support is still required. They are commonly used in small electric motors, fans, pumps, automation equipment, power tools, and compact machinery.

6900 Series bearings are available in different bore sizes and can be supplied with different configurations according to the requirements of the application. Common configurations include open, shielded, and sealed bearings, allowing the bearing to be selected according to contamination, lubrication, operating speed, and maintenance requirements.

For OEM and industrial applications, bearing performance can also be affected by factors such as internal clearance, grease, sealing configuration, operating temperature, and production requirements. RIVER BEARING can coordinate suitable manufacturing resources in China to support application-specific bearing requirements and OEM production needs.

6900 Series Bearing Applications

6900 Series bearings are suitable for equipment where compact dimensions, reduced weight, and dependable rotation are important. Their thin-section design allows them to be used in a wide range of equipment where installation space is limited while reliable bearing performance is still required.

How to Choose a 6900 Series Bearing

How to Choose a 6900 Series Bearing

When selecting a 6900 Series Deep Groove Ball Bearing, consider the bearing size, load requirements, operating speed, available space, and required configuration.

Check the Bore and Outer Diameter

Choose a bearing with a bore diameter that matches the shaft and an outer diameter that fits the housing. Make sure the selected model provides the required fit and installation dimensions.

Consider Load Requirements

Check the radial and axial loads required by the application. Compare the required load capacity with the dynamic and static load ratings of the selected 6900 Series bearing.

Consider Speed and Operating Conditions

Consider operating speed, temperature, lubrication, and other working conditions. For high-speed applications, bearing clearance and lubrication should also be considered.

Check the Available Space

The 6900 Series has a thin cross-section and is suitable for applications where radial space is limited. Check the bearing width and surrounding installation space before selecting a model.

Confirm the Bearing Configuration

Select the appropriate bearing configuration according to the application requirements, including internal clearance, shields, seals, and lubrication. Special operating conditions can also be discussed for customized bearing solutions.

6900 Series Bearing Questions

What are the main features of 6900 Series bearings?

6900 Series bearings have a relatively thin cross-section, making them suitable for compact equipment where installation space is limited. They provide a combination of radial load capacity, moderate axial load capacity, and low friction.

They are commonly used in compact motors, instruments, power tools, fans, and other applications where space and running performance are important.

Can 6900 Series bearings be used in high-speed applications?

Yes. The compact cross-section and relatively low weight of 6900 Series bearings make them suitable for many high-speed applications. They are commonly used in equipment such as small motors, fans, precision mechanisms, and other compact rotating equipment.

The actual operating speed depends on the bearing size, internal clearance, lubrication, load, temperature, and bearing configuration. Open and ZZ versions generally generate less friction than contact-sealed versions, while 2RS bearings provide stronger protection against contamination. For a specific high-speed application, the operating conditions should be checked before selecting the final configuration.

What applications are 6900 Series bearings commonly used for?

6900 Series bearings are commonly used in compact equipment where limited installation space, low weight, and reliable rotational performance are important. Typical applications include small electric motors, fans and blowers, power tools, automation equipment, instruments, office equipment, and other compact machinery.

The appropriate 6900 Series bearing configuration depends on the equipment’s load, speed, operating environment, available space, and sealing requirements. For applications exposed to dust, moisture, or other contaminants, a suitable shielded or sealed configuration may be considered.

What are the different seal, shield, and open options for the same bearing size?

Deep groove ball bearings are available in open, shielded (ZZ), and sealed (2RS) designs. Read the full guide on bearing seals and shields to choose the right protection for your application.

How do I choose the right 6900 Series bearing?

Start with the required bore diameter, outer diameter, and width to make sure the bearing fits the shaft and housing. Then consider the radial and axial loads, operating speed, temperature, lubrication, and installation conditions.

Next, select the appropriate internal clearance and bearing configuration for the application. Normal clearance is suitable for many standard operating conditions, while C3 clearance may be considered for certain higher-temperature applications or interference fits. Open, ZZ, RS, and 2RS configurations provide different levels of friction and protection against contamination. The final choice should be based on the actual equipment requirements rather than bearing size alone.

Need Help Finding the Right Bearing in the 6900 Series?

Share your operating speed and lubrication conditions for a tailored recommendation.

Ask About 6900 Series Bearings →