Bearing Packaging

1. Basic Requirements for Bearing Packaging

Bearing packaging should meet the basic requirements of rust prevention, moisture protection, shock protection, and contamination prevention.

The main material of bearings is bearing steel, which is susceptible to rust when exposed to moisture. Therefore, after the bearings are manufactured and pass inspection, rust-preventive treatment should be carried out in a timely manner. Packaging should be carried out after the rust-preventive treatment is completed.

Packaging materials should have good moisture resistance and should be compatible with the bearing material without producing corrosive substances.

During transportation, bearings may be subject to vibration and impact, so the packaging should provide sufficient cushioning protection.

Dust, impurities, and other contaminants can affect the service life of bearings, so the packaging should also provide good sealing.

In addition, packaging should preferably be carried out in a clean and dry environment. Appropriate packaging materials and methods should be selected according to the bearing type, size, quantity, transportation method, climate conditions, and customer requirements.

2. Common Bearing Packaging Materials and Methods

2.1 Inner Packaging Methods

Miniature bearings:
50 sets of bearings are packed in one long plastic tube, or 10 sets of bearings are packed in one plastic tube. Five plastic tubes are then packed in one paper box, which is finally placed in an outer carton lined with a large plastic bag.

Small bearings:
Five or ten sets of bearings are packed in one plastic tube, and then placed in an outer carton lined with a large plastic bag.

Medium and large bearings:
Several sets of bearings are wrapped with rust-preventive paper and then placed in an outer carton lined with a large plastic bag.

According to actual requirements, VCI (vapor corrosion inhibitor) bags and other materials may also be used. The end caps of plastic tubes should be securely sealed to prevent rust-preventive oil from leaking or moisture from entering.

Paper boxes and outer cartons should have sufficient strength to protect the bearings from damage during handling and transportation.

2.2 Outer Carton and Pallet Packaging

After the bearings are packed into the outer cartons, the cartons are reinforced with four packing straps and then placed and secured on pallets.

Composite-board pallets, fumigated wooden pallets, or wooden crate pallets can generally be selected according to customer requirements.

The entire pallet is wrapped with stretch film to prevent the goods from getting wet from rain during transportation.

Finally, six plastic-steel straps are used to secure the entire pallet to prevent the pallet from becoming loose or deformed, or the goods from being damaged during ocean transportation.

The outer cartons should be arranged neatly on the pallet with a stable center of gravity. If necessary, corner protectors, dividers, or top covers may be added. The stretch film should be wrapped with sufficient overlap and secured to the pallet. The plastic-steel straps should be evenly distributed and properly tightened to avoid damaging the outer cartons.

If the customer has special requirements, the specified pallet type, reinforcement method, and marking requirements should be followed.

Based on the factory’s many years of export experience, the maximum weight of an outer carton is generally controlled within 25 kg (for European customers, within 20 kg). The maximum weight of a single pallet is generally controlled within 800–900 kg, and the gross weight of the palletized cargo loaded into a 20-foot container is generally controlled at no more than 22 metric tons.

The actual weight should also be adjusted according to the container weight limit, destination port requirements, and inland transportation requirements.

After 1–2 months of ocean transportation, the pallets and outer cartons should arrive at the customer’s warehouse intact and undamaged.

3. Proper Packaging Marking

The marking information on the packaging is very important for the storage, transportation, and use of bearings. The markings should be clear, accurate, and durable, and should have a certain degree of resistance to water, oil contamination, and detachment.

Outer carton markings usually include the bearing model, quantity, weight (gross/net weight), production batch number, production year and month, and barcode or QR code.

Clear markings help users correctly identify the products and store and use them as required.

Pallets should be marked with shipping marks, serial numbers, and information specified by the customer, such as the consignee, destination, and pallet number, so that the goods can be correctly sorted and distributed during transportation and arrive accurately at the customer’s designated destination.

In addition, according to export requirements, the shipping marks on the pallets should be consistent with documents such as the packing list, invoice, and bill of lading. The marking information should match the actual goods.

Have Specific Bearing Packaging Requirements?

Contact us to discuss packaging, labeling, and export shipment requirements.

Discuss Packaging Requirements →