Bearing Vibration Standards: Z vs V Explained

Bearing vibration is evaluated using two different measurement systems:

  • Z (acceleration) — noise and vibration measured as acceleration and expressed in decibels (dB).
  • V (velocity) — vibration measured as velocity and expressed in micrometres per second (μm/s).

The two systems measure different physical quantities and are not directly comparable. A value obtained under the Z standard cannot be converted into a V grade, so the classification system must always be stated together with the measured value.

Bearing Vibration Velocity Levels (V Standard, μm/s)

The V standard classifies bearing vibration velocity across low, medium, and high frequency bands. It provides a more detailed evaluation of bearing performance compared to acceleration-based methods.(The inspection is carried out using instrument S0910-1)

← Swipe to view full table

Vibration Velocity Limits by Bore Diameter (μm/s)
Bore Diameter (mm) V V1 V2 V3 V4
LowMediumHigh LowMediumHigh LowMediumHigh LowMediumHigh LowMediumHigh
3,4804444603532482622311615281010
5,61107260744840583630352118321111
7,8,91309680926654724840442824381212
10,121601201001208070906050553530451415
15210150120150100851107860654635521818
17210150120150100851107860654635522525
2026019015018012510013010075806045602525
2226019015018012510013010075806045603032
2526019015018012510013010075806045603032
2826019015018012510013010075806045603540
30300240190200150130150120100907560703540
32300240190200150130150120100907560703540
35300240190200150130150120100907560704245
403603002602401801601801501301109080825050
453603002602401801601801501301109080826060
50420320320280200200210160160125100100957070
55420360360280220200210180180120110110957070
604803604403202202402401802001451101301008080
6530026042018016024013010015010580105505075
7036031046020018028015012020011090135585888
7536031046020018028015012020011090135585888
804203605402402103201801202401301101606565100
854203605402402103201801202401301101606565100
904804206002902503702101802701451251807575115
954804206002902503702101802701451251807575115
1005604906703403004202502153101701452008888135
1055604906703403004202502153101701452008888135
110640570750400350480290260350190175225100100160
115640570750400350480290260350190175225100100160

Bearing Noise Levels (Z Standard, dB)

Noise levels are classified according to the Z standard (acceleration-based). Some larger bore sizes do not define Z4 values, and these are intentionally left blank.             (The inspection is carried out using instrument BVT-1)

← Swipe to view full table

Noise Limits by Bore Diameter and Diameter Series (dB)
Bore (mm) Series 0 Series 2 Series 3
ZZ1Z2Z3Z4 ZZ1Z2Z3Z4 ZZ1Z2Z3Z4
3353432282436353230263736333127
4353432282436353230263736333127
5373634302638373432283937353329
6373634302638373432283937353329
7393835312740383634294139373530
8393835312740383634294139373530
9414036322842403735304341393732
10434238332844423935304644403732
12444339342945433935304745403732
15454440353046444136314846423833
17464440353047454136314947423833
20474541363148464238335048433934
22474541363148464238335048433934
25484642383449474340365149444137
28494743393550484441375250454238
30494743393550484441375250454238
32504844403651494542385351464339
35514945413752504643395452474440
40535146423854524744405654494541
45555348454256544946435856514744
50575450474458555148456057534946
55595652494660575350476259545148
60615854514862595451486461565350
6549484641–50494742–51504843–
7050494742–51504843–52514944–
7551504843–52514944–53525045–
8052514944–53525045–54535146–
8553525045–54535146–56555247–
9054535247–56555348–58575449–
9556555449–58575550–60595651–
10058575651–60595752–62615853–
10560595853–62615954–64636055–
11062616055–64636156–66656257–
12064636257–66656358–68676459–

*“–” indicates values not defined in the standard for this size range.

“–” indicates values not specified in the standard. For larger bore sizes (≥65 mm), Z4 noise level classifications are not defined in the current standard. In practical applications, selection should be based on vibration (V grade) and application requirements.

Bearing Vibration Testing: How We Control Noise & Performance

Low noise and stable vibration are critical indicators of bearing quality—especially for applications such as electric motors, household appliances, and precision machinery. Excessive vibration not only affects noise levels, but can also lead to premature failure, increased energy consumption, and unexpected downtime.

How Bearing Vibration Is Measured

During testing, the bearing inner ring rotates at a constant speed while the outer ring remains fixed. A high-sensitivity sensor is placed in contact with the outer ring, capturing real-time vibration signals generated during operation.

These mechanical vibrations are converted into electrical signals and analyzed by a measuring instrument. The system then provides:

  • Numerical values (RMS and peak vibration levels)

  • Waveform analysis (to identify irregularities)

  • Audible output (to detect abnormal noise patterns)

This multi-dimensional evaluation ensures that both measurable vibration and subjective noise quality are fully controlled.

Key Components of the Testing System

To ensure accurate and repeatable results, a professional bearing vibration tester includes:

  • Spindle System – drives the inner ring at a controlled speed

  • Loading Device – applies proper preload to simulate real working conditions

  • Sensor Positioning System – ensures precise and consistent measurement points

  • High-Sensitivity Sensor – captures vibration signals with high accuracy

  • Electronic Analyzer – processes and displays vibration data in multiple formats


RIVER BEARING Experience: What Really Causes Bearing Vibration

Based on extensive production experience and testing practice, the sources of vibration in rolling bearings are multiple and complex. In actual manufacturing environments, the primary causes typically include:

  • Roundness deviation and waviness of raceways and rolling elements

  • Micro-asperity interaction due to insufficient lubrication film between contact surfaces

  • Contamination particles within the bearing

  • Variation of stiffness during rotation

  • Cage instability or wobbling during operation

For deep groove ball bearings, which represent the largest usage volume globally, many proven engineering measures are applied in factories to reduce vibration and noise:

  • Improving raceway roundness, waviness, and surface roughness

  • Using high-quality steel balls with better sphericity, waviness, and surface strengthening

  • Strict control of dimensional tolerances (inner/outer diameter, groove curvature, ball size, internal clearance)

  • Selecting low-noise, low-vibration grease

  • Optimizing groove curvature radius and raceway geometry

  • Enhancing cleanliness during production and assembly

  • Using engineered cages (e.g., plastic cages or optimized stamped cages with controlled pocket geometry)

  • Applying seals or shields with tightly controlled dimensions and shape

  • Preventing surface damage such as dents or handling marks

These are not theoretical improvements—they are practical controls implemented at the factory level that directly determine vibration class (V-level) and real-world performance.


Why This Matters for Your Application

Not all bearings are tested or manufactured to the same level of control. In many industrial applications, vibration performance directly impacts:

  • Equipment noise levels

  • Operating stability

  • Service life

  • Maintenance costs

By applying strict vibration testing and manufacturing control, we ensure that the bearings you receive match your application requirements—whether you need standard industrial performance or low-noise precision solutions.


Need Low-Noise Bearings?

RIVER BEARING offers different vibration quality levels to match your application and budget:

  • Standard Grade (Z1–Z2)
    Suitable for general industrial applications. Bearings are batch-tested using vibration measuring instruments to ensure stable and consistent quality.
  • Premium Grade (Z2V2, Z3V3 – also known as EMQ: Electric Motor Quality)
    Designed for low-noise and precision applications such as electric motors and appliances.
    Each bearing is 100% individually tested using vibration instruments to ensure strict noise and vibration control.

The key difference is not just the grade—but the inspection method and control level behind it.

Need Help with Vibration Quality Levels?

Tell us your application, noise requirement, and target market — we will match the right vibration quality levels and manufacturing solution for you.

Ask About Vibration Quality Levels →