Bearing Vibration Standards: Z vs V Explained
Bearing vibration is evaluated using two different measurement systems:
- Z (acceleration) — noise and vibration measured as acceleration and expressed in decibels (dB).
- V (velocity) — vibration measured as velocity and expressed in micrometres per second (μm/s).
The two systems measure different physical quantities and are not directly comparable. A value obtained under the Z standard cannot be converted into a V grade, so the classification system must always be stated together with the measured value.
Bearing Vibration Velocity Levels (V Standard, μm/s)
The V standard classifies bearing vibration velocity across low, medium, and high frequency bands. It provides a more detailed evaluation of bearing performance compared to acceleration-based methods.(The inspection is carried out using instrument S0910-1)
← Swipe to view full table
| Bore Diameter (mm) | V | V1 | V2 | V3 | V4 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Low | Medium | High | Low | Medium | High | Low | Medium | High | Low | Medium | High | Low | Medium | High | |
| 3,4 | 80 | 44 | 44 | 60 | 35 | 32 | 48 | 26 | 22 | 31 | 16 | 15 | 28 | 10 | 10 |
| 5,6 | 110 | 72 | 60 | 74 | 48 | 40 | 58 | 36 | 30 | 35 | 21 | 18 | 32 | 11 | 11 |
| 7,8,9 | 130 | 96 | 80 | 92 | 66 | 54 | 72 | 48 | 40 | 44 | 28 | 24 | 38 | 12 | 12 |
| 10,12 | 160 | 120 | 100 | 120 | 80 | 70 | 90 | 60 | 50 | 55 | 35 | 30 | 45 | 14 | 15 |
| 15 | 210 | 150 | 120 | 150 | 100 | 85 | 110 | 78 | 60 | 65 | 46 | 35 | 52 | 18 | 18 |
| 17 | 210 | 150 | 120 | 150 | 100 | 85 | 110 | 78 | 60 | 65 | 46 | 35 | 52 | 25 | 25 |
| 20 | 260 | 190 | 150 | 180 | 125 | 100 | 130 | 100 | 75 | 80 | 60 | 45 | 60 | 25 | 25 |
| 22 | 260 | 190 | 150 | 180 | 125 | 100 | 130 | 100 | 75 | 80 | 60 | 45 | 60 | 30 | 32 |
| 25 | 260 | 190 | 150 | 180 | 125 | 100 | 130 | 100 | 75 | 80 | 60 | 45 | 60 | 30 | 32 |
| 28 | 260 | 190 | 150 | 180 | 125 | 100 | 130 | 100 | 75 | 80 | 60 | 45 | 60 | 35 | 40 |
| 30 | 300 | 240 | 190 | 200 | 150 | 130 | 150 | 120 | 100 | 90 | 75 | 60 | 70 | 35 | 40 |
| 32 | 300 | 240 | 190 | 200 | 150 | 130 | 150 | 120 | 100 | 90 | 75 | 60 | 70 | 35 | 40 |
| 35 | 300 | 240 | 190 | 200 | 150 | 130 | 150 | 120 | 100 | 90 | 75 | 60 | 70 | 42 | 45 |
| 40 | 360 | 300 | 260 | 240 | 180 | 160 | 180 | 150 | 130 | 110 | 90 | 80 | 82 | 50 | 50 |
| 45 | 360 | 300 | 260 | 240 | 180 | 160 | 180 | 150 | 130 | 110 | 90 | 80 | 82 | 60 | 60 |
| 50 | 420 | 320 | 320 | 280 | 200 | 200 | 210 | 160 | 160 | 125 | 100 | 100 | 95 | 70 | 70 |
| 55 | 420 | 360 | 360 | 280 | 220 | 200 | 210 | 180 | 180 | 120 | 110 | 110 | 95 | 70 | 70 |
| 60 | 480 | 360 | 440 | 320 | 220 | 240 | 240 | 180 | 200 | 145 | 110 | 130 | 100 | 80 | 80 |
| 65 | 300 | 260 | 420 | 180 | 160 | 240 | 130 | 100 | 150 | 105 | 80 | 105 | 50 | 50 | 75 |
| 70 | 360 | 310 | 460 | 200 | 180 | 280 | 150 | 120 | 200 | 110 | 90 | 135 | 58 | 58 | 88 |
| 75 | 360 | 310 | 460 | 200 | 180 | 280 | 150 | 120 | 200 | 110 | 90 | 135 | 58 | 58 | 88 |
| 80 | 420 | 360 | 540 | 240 | 210 | 320 | 180 | 120 | 240 | 130 | 110 | 160 | 65 | 65 | 100 |
| 85 | 420 | 360 | 540 | 240 | 210 | 320 | 180 | 120 | 240 | 130 | 110 | 160 | 65 | 65 | 100 |
| 90 | 480 | 420 | 600 | 290 | 250 | 370 | 210 | 180 | 270 | 145 | 125 | 180 | 75 | 75 | 115 |
| 95 | 480 | 420 | 600 | 290 | 250 | 370 | 210 | 180 | 270 | 145 | 125 | 180 | 75 | 75 | 115 |
| 100 | 560 | 490 | 670 | 340 | 300 | 420 | 250 | 215 | 310 | 170 | 145 | 200 | 88 | 88 | 135 |
| 105 | 560 | 490 | 670 | 340 | 300 | 420 | 250 | 215 | 310 | 170 | 145 | 200 | 88 | 88 | 135 |
| 110 | 640 | 570 | 750 | 400 | 350 | 480 | 290 | 260 | 350 | 190 | 175 | 225 | 100 | 100 | 160 |
| 115 | 640 | 570 | 750 | 400 | 350 | 480 | 290 | 260 | 350 | 190 | 175 | 225 | 100 | 100 | 160 |
Bearing Noise Levels (Z Standard, dB)
Noise levels are classified according to the Z standard (acceleration-based). Some larger bore sizes do not define Z4 values, and these are intentionally left blank. (The inspection is carried out using instrument BVT-1)
← Swipe to view full table
| Bore (mm) | Series 0 | Series 2 | Series 3 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Z | Z1 | Z2 | Z3 | Z4 | Z | Z1 | Z2 | Z3 | Z4 | Z | Z1 | Z2 | Z3 | Z4 | |
| 3 | 35 | 34 | 32 | 28 | 24 | 36 | 35 | 32 | 30 | 26 | 37 | 36 | 33 | 31 | 27 |
| 4 | 35 | 34 | 32 | 28 | 24 | 36 | 35 | 32 | 30 | 26 | 37 | 36 | 33 | 31 | 27 |
| 5 | 37 | 36 | 34 | 30 | 26 | 38 | 37 | 34 | 32 | 28 | 39 | 37 | 35 | 33 | 29 |
| 6 | 37 | 36 | 34 | 30 | 26 | 38 | 37 | 34 | 32 | 28 | 39 | 37 | 35 | 33 | 29 |
| 7 | 39 | 38 | 35 | 31 | 27 | 40 | 38 | 36 | 34 | 29 | 41 | 39 | 37 | 35 | 30 |
| 8 | 39 | 38 | 35 | 31 | 27 | 40 | 38 | 36 | 34 | 29 | 41 | 39 | 37 | 35 | 30 |
| 9 | 41 | 40 | 36 | 32 | 28 | 42 | 40 | 37 | 35 | 30 | 43 | 41 | 39 | 37 | 32 |
| 10 | 43 | 42 | 38 | 33 | 28 | 44 | 42 | 39 | 35 | 30 | 46 | 44 | 40 | 37 | 32 |
| 12 | 44 | 43 | 39 | 34 | 29 | 45 | 43 | 39 | 35 | 30 | 47 | 45 | 40 | 37 | 32 |
| 15 | 45 | 44 | 40 | 35 | 30 | 46 | 44 | 41 | 36 | 31 | 48 | 46 | 42 | 38 | 33 |
| 17 | 46 | 44 | 40 | 35 | 30 | 47 | 45 | 41 | 36 | 31 | 49 | 47 | 42 | 38 | 33 |
| 20 | 47 | 45 | 41 | 36 | 31 | 48 | 46 | 42 | 38 | 33 | 50 | 48 | 43 | 39 | 34 |
| 22 | 47 | 45 | 41 | 36 | 31 | 48 | 46 | 42 | 38 | 33 | 50 | 48 | 43 | 39 | 34 |
| 25 | 48 | 46 | 42 | 38 | 34 | 49 | 47 | 43 | 40 | 36 | 51 | 49 | 44 | 41 | 37 |
| 28 | 49 | 47 | 43 | 39 | 35 | 50 | 48 | 44 | 41 | 37 | 52 | 50 | 45 | 42 | 38 |
| 30 | 49 | 47 | 43 | 39 | 35 | 50 | 48 | 44 | 41 | 37 | 52 | 50 | 45 | 42 | 38 |
| 32 | 50 | 48 | 44 | 40 | 36 | 51 | 49 | 45 | 42 | 38 | 53 | 51 | 46 | 43 | 39 |
| 35 | 51 | 49 | 45 | 41 | 37 | 52 | 50 | 46 | 43 | 39 | 54 | 52 | 47 | 44 | 40 |
| 40 | 53 | 51 | 46 | 42 | 38 | 54 | 52 | 47 | 44 | 40 | 56 | 54 | 49 | 45 | 41 |
| 45 | 55 | 53 | 48 | 45 | 42 | 56 | 54 | 49 | 46 | 43 | 58 | 56 | 51 | 47 | 44 |
| 50 | 57 | 54 | 50 | 47 | 44 | 58 | 55 | 51 | 48 | 45 | 60 | 57 | 53 | 49 | 46 |
| 55 | 59 | 56 | 52 | 49 | 46 | 60 | 57 | 53 | 50 | 47 | 62 | 59 | 54 | 51 | 48 |
| 60 | 61 | 58 | 54 | 51 | 48 | 62 | 59 | 54 | 51 | 48 | 64 | 61 | 56 | 53 | 50 |
| 65 | 49 | 48 | 46 | 41 | – | 50 | 49 | 47 | 42 | – | 51 | 50 | 48 | 43 | – |
| 70 | 50 | 49 | 47 | 42 | – | 51 | 50 | 48 | 43 | – | 52 | 51 | 49 | 44 | – |
| 75 | 51 | 50 | 48 | 43 | – | 52 | 51 | 49 | 44 | – | 53 | 52 | 50 | 45 | – |
| 80 | 52 | 51 | 49 | 44 | – | 53 | 52 | 50 | 45 | – | 54 | 53 | 51 | 46 | – |
| 85 | 53 | 52 | 50 | 45 | – | 54 | 53 | 51 | 46 | – | 56 | 55 | 52 | 47 | – |
| 90 | 54 | 53 | 52 | 47 | – | 56 | 55 | 53 | 48 | – | 58 | 57 | 54 | 49 | – |
| 95 | 56 | 55 | 54 | 49 | – | 58 | 57 | 55 | 50 | – | 60 | 59 | 56 | 51 | – |
| 100 | 58 | 57 | 56 | 51 | – | 60 | 59 | 57 | 52 | – | 62 | 61 | 58 | 53 | – |
| 105 | 60 | 59 | 58 | 53 | – | 62 | 61 | 59 | 54 | – | 64 | 63 | 60 | 55 | – |
| 110 | 62 | 61 | 60 | 55 | – | 64 | 63 | 61 | 56 | – | 66 | 65 | 62 | 57 | – |
| 120 | 64 | 63 | 62 | 57 | – | 66 | 65 | 63 | 58 | – | 68 | 67 | 64 | 59 | – |
*“–” indicates values not defined in the standard for this size range.
“–” indicates values not specified in the standard. For larger bore sizes (≥65 mm), Z4 noise level classifications are not defined in the current standard. In practical applications, selection should be based on vibration (V grade) and application requirements.
Bearing Vibration Testing: How We Control Noise & Performance
Low noise and stable vibration are critical indicators of bearing quality—especially for applications such as electric motors, household appliances, and precision machinery. Excessive vibration not only affects noise levels, but can also lead to premature failure, increased energy consumption, and unexpected downtime.
How Bearing Vibration Is Measured
During testing, the bearing inner ring rotates at a constant speed while the outer ring remains fixed. A high-sensitivity sensor is placed in contact with the outer ring, capturing real-time vibration signals generated during operation.
These mechanical vibrations are converted into electrical signals and analyzed by a measuring instrument. The system then provides:
Numerical values (RMS and peak vibration levels)
Waveform analysis (to identify irregularities)
Audible output (to detect abnormal noise patterns)
This multi-dimensional evaluation ensures that both measurable vibration and subjective noise quality are fully controlled.
Key Components of the Testing System
To ensure accurate and repeatable results, a professional bearing vibration tester includes:
Spindle System – drives the inner ring at a controlled speed
Loading Device – applies proper preload to simulate real working conditions
Sensor Positioning System – ensures precise and consistent measurement points
High-Sensitivity Sensor – captures vibration signals with high accuracy
Electronic Analyzer – processes and displays vibration data in multiple formats
RIVER BEARING Experience: What Really Causes Bearing Vibration
Based on extensive production experience and testing practice, the sources of vibration in rolling bearings are multiple and complex. In actual manufacturing environments, the primary causes typically include:
Roundness deviation and waviness of raceways and rolling elements
Micro-asperity interaction due to insufficient lubrication film between contact surfaces
Contamination particles within the bearing
Variation of stiffness during rotation
Cage instability or wobbling during operation
For deep groove ball bearings, which represent the largest usage volume globally, many proven engineering measures are applied in factories to reduce vibration and noise:
Improving raceway roundness, waviness, and surface roughness
Using high-quality steel balls with better sphericity, waviness, and surface strengthening
Strict control of dimensional tolerances (inner/outer diameter, groove curvature, ball size, internal clearance)
Selecting low-noise, low-vibration grease
Optimizing groove curvature radius and raceway geometry
Enhancing cleanliness during production and assembly
Using engineered cages (e.g., plastic cages or optimized stamped cages with controlled pocket geometry)
Applying seals or shields with tightly controlled dimensions and shape
Preventing surface damage such as dents or handling marks
These are not theoretical improvements—they are practical controls implemented at the factory level that directly determine vibration class (V-level) and real-world performance.
Why This Matters for Your Application
Not all bearings are tested or manufactured to the same level of control. In many industrial applications, vibration performance directly impacts:
Equipment noise levels
Operating stability
Service life
Maintenance costs
By applying strict vibration testing and manufacturing control, we ensure that the bearings you receive match your application requirements—whether you need standard industrial performance or low-noise precision solutions.
Need Low-Noise Bearings?
RIVER BEARING offers different vibration quality levels to match your application and budget:
- Standard Grade (Z1–Z2)
Suitable for general industrial applications. Bearings are batch-tested using vibration measuring instruments to ensure stable and consistent quality. - Premium Grade (Z2V2, Z3V3 – also known as EMQ: Electric Motor Quality)
Designed for low-noise and precision applications such as electric motors and appliances.
Each bearing is 100% individually tested using vibration instruments to ensure strict noise and vibration control.
The key difference is not just the grade—but the inspection method and control level behind it.
Need Help with Vibration Quality Levels?
Tell us your application, noise requirement, and target market — we will match the right vibration quality levels and manufacturing solution for you.