Common Bearing Types and Their Applications

1. Angular Contact Ball Bearings

  • Structure and Definition: The inner and outer rings have a contact angle with the balls. Standard contact angles commonly include 15°, 25°, and 40°, often designated as C, AC, and B, respectively, depending on the bearing series and manufacturer’s designation system.
  • Key Characteristics: A larger contact angle provides greater axial load capacity, while a smaller contact angle is more suitable for high-speed rotation. Single-row bearings can support radial loads and unidirectional axial loads.
  • Typical Applications: Single-row bearings are used in machine tool spindles and high-frequency motors, while double-row bearings are used in oil pumps and Roots blowers.

2. Self-Aligning Ball Bearings

  • Structure and Definition: These bearings have two rows of steel balls and a spherical outer ring raceway, providing self-aligning capability.
  • Key Characteristics: They primarily support radial loads and can accommodate limited axial loads, but cannot support pure axial loads. Their self-aligning design compensates for shaft misalignment within the limits specified for the bearing series.
  • Typical Applications: Woodworking machinery, transmission shafts in textile machinery, and similar equipment.

3. Spherical Roller Bearings

  • Structure and Definition: Spherical rollers are arranged between a spherical outer ring raceway and an inner ring with two raceways.
  • Key Characteristics: They provide self-aligning capability and can support radial loads and bidirectional axial loads. Their high radial load capacity makes them suitable for heavy loads and impact loads.
  • Typical Applications: Papermaking machinery, reduction gear units, railway vehicle axles, and similar equipment.

4. Thrust Spherical Roller Bearings

  • Structure and Definition: These bearings use spherical rollers arranged at an angle between a shaft washer and a housing washer with a spherical raceway. This design provides self-aligning capability and accommodates shaft misalignment.
  • Key Characteristics: They are designed primarily to support high axial loads and can also accommodate radial loads under combined loading conditions. The permissible radial load depends on the bearing design and operating conditions. Oil lubrication is commonly used, depending on operating conditions.
  • Typical Applications: Hydroelectric generators, vertical electric motors, marine propeller shafts, crane hooks, heavy-duty rotary tables, and other heavy-duty equipment subjected to high axial loads.

5. Tapered Roller Bearings

  • Structure and Definition: These bearings contain tapered rollers. The extended lines of the raceways and roller contact surfaces converge at a common point on the bearing axis, enabling effective rolling contact.
  • Key Characteristics: Single-row bearings can support radial loads and unidirectional axial loads, while double-row bearings can support radial loads and bidirectional axial loads. They are suitable for heavy loads and impact loads.
  • Typical Applications: Front and rear automobile wheels, transmissions, differential pinion shafts, and similar components.

6. Deep Groove Ball Bearings

  • Structure and Definition: Each ring has a deep, continuous raceway groove that accommodates the balls and supports radial loads as well as limited axial loads.
  • Key Characteristics: They primarily support radial loads and can also accommodate a certain amount of axial load. They have a low coefficient of friction and high limiting speed.
  • Typical Applications: Automobiles, tractors, machine tools, electric motors, water pumps, and similar equipment.

7. Thrust Ball Bearings

  • Structure and Definition: These bearings consist of washer-shaped raceway rings with raceways, together with a ball and cage assembly. They are available in single-direction and double-direction designs.
  • Key Characteristics: They can support axial loads only and cannot support radial loads. Single-direction bearings support axial loads in one direction, while double-direction bearings support axial loads in both directions.
  • Typical Applications: Automotive steering systems, rotary tables, and other mechanisms requiring axial load support.

8. Cylindrical Roller Bearings

  • Structure and Definition: The rollers are generally guided by two ribs. These are separable bearings, making installation and removal convenient.
  • Key Characteristics: They generally support radial loads only. NJ and NF types can support relatively small unidirectional axial loads, while NUP and NH types can support a certain amount of bidirectional axial load.
  • Typical Applications: Large electric motors, machine tool spindles, axleboxes, and similar components.

9. Four-Point Contact Ball Bearings

  • Structure and Definition: The inner and outer ring raceways have Gothic arch-shaped cross-sections, allowing the balls to make four-point contact with the rings.
  • Key Characteristics: They are primarily designed to support axial loads in both directions and can accommodate limited radial loads. In suitable arrangements, a single bearing may replace a pair of angular contact ball bearings, depending on the load conditions and design requirements.
  • Typical Applications: Aircraft jet engines, gas turbines, and similar equipment.

10. Thrust Cylindrical Roller Bearings

  • Structure and Definition: These bearings consist of washer-shaped raceway rings and a cylindrical roller and cage assembly. The cylindrical rollers have a convex profile.
  • Key Characteristics: They can support unidirectional axial loads, with high axial load capacity and high axial rigidity.
  • Typical Applications: Oil drilling rigs, ironmaking and steelmaking machinery, and similar equipment.

11. Thrust Needle Roller Bearings

  • Structure and Definition: Separable bearings consist of a raceway ring and a needle roller and cage assembly. They can support unidirectional axial loads.
  • Key Characteristics: They require little space, making them suitable for compact mechanical designs. Radial loads must be supported by other bearings.
  • Typical Applications: Transmission systems in automobiles, cultivators, machine tools, and similar equipment.

12. Thrust Tapered Roller Bearings

  • Structure and Definition: These bearings use tapered rollers arranged between specially designed raceway washers. The roller and raceway geometry is designed to provide effective guidance and support axial loads.
  • Key Characteristics: Single-direction bearings support axial loads in one direction, while double-direction bearings support axial loads in both directions.
  • Typical Applications: Single-direction bearings are used in crane hooks and rotary tables for oil drilling rigs, while double-direction bearings are used in the roll necks of rolling mills.

13. Mounted Ball Bearing Units

  • Structure and Definition: These units combine an insert ball bearing with a housing, typically made of cast iron or pressed steel. The bearing commonly features a spherical outer ring that fits into a corresponding spherical seat in the housing, allowing limited self-alignment. Common housing configurations include pillow block, flange, and take-up units.
  • Key Characteristics: Mounted ball bearing units are designed for convenient installation and replacement. They primarily support radial loads and can accommodate certain axial loads, depending on the bearing design and operating conditions. Many units feature seals and relubrication provisions for improved protection and service life.
  • Typical Applications: Agricultural machinery, conveyors, mining equipment, textile machinery, packaging machinery, and other industrial applications requiring convenient bearing mounting and maintenance.

Which Bearing Type Suits Your Application?

Contact us to discuss your application and find the right bearing solution.

Find the Right Bearing Type →