Inch Series Deep Groove Ball Bearings

Inch Series deep groove ball bearings are designed for applications that use imperial shaft and housing dimensions. Their deep groove design supports radial loads and moderate axial loads while providing smooth and reliable rotation for a wide range of equipment.

Unlike metric bearing series, Inch Series bearings use inch-based dimensions for the bore, outside diameter, and width. This makes them suitable for equipment originally designed around imperial dimensional standards, where using the correct inch-size bearing is important for proper shaft and housing fit.

The Inch Series includes a range of compact bearing sizes, including 1600 Series models, R Series bearings, and selected metric bearing designs adapted with inch-size bores while retaining the original metric outside diameter and width

Inch Series Bearing Specifications

The following table provides the main specifications and dimensions of selected Inch Series bearing models.

Inch Series Bearing Models

← Swipe to view full table

Bearing model d Bore (mm) D Outer Dia. (mm) B Width (mm)
1614 2RS 9.525 28.575 9.525
1615 2RS 11.113 28.575 9.525
1616 2RS 12.7 28.575 9.525
1620 2RS 11.11 34.925 11.11
1621 2RS 12.7 34.925 11.11
1622 2RS 14.288 34.925 11.11
1623 2RS 15.875 34.925 11.11
1628 2RS 15.875 41.275 12.7
1630 2RS 19.05 41.275 12.7
1633 2RS 15.875 44.45 12.7
1635 2RS 19.05 44.45 12.7
1638 2RS 19.05 50.8 14.288
1640 2RS 22.225 50.8 14.288
1641 2RS 25.4 50.8 14.288
99502H (2RS) 15.875 34.925 11
77502H (ZZ) 15.875 34.925 11
6201 2RS(ZZ)12.7 12.7 32 10
6202 2RS(ZZ)12.7 12.7 35 11
6202 2RS(ZZ)15.875 15.875 35 11
6203 2RS(ZZ)19.05 19.05 40 12
6203 2RS(ZZ)11.11 11.11 40 12

R Series Bearings

← Swipe to view full table

Bearing
model
d
Bore
D
Outer Dia.
B
Width
Minimum
chamfer rmin
Ball
diameter
(mm)
Ball
Qty
Cr
Dynamic
(KN)
Cor
Static
(KN)
Weight
(kg)
mm inch mm inch open Shielded /
sealed
mm inch
mm inch mm inch
R2 3.175 0.125 9.525 0.375 3.970 0.1562 3.970 0.1562 0.15 0.0059 1.588 7 0.63 0.218 0.0014
R3 4.762 0.1875 12.7 0.5 3.970 0.1562 4.980 0.1960 0.3 0.0118 2.381 7 1.3 0.485 0.0022
R4 6.35 0.25 15.875 0.625 4.978 0.196 4.980 0.1960 0.3 0.0118 2.381 8 1.48 0.615 0.0045
R6 9.525 0.375 22.225 0.875 5.56 0.2188 7.14 0.2812 0.4 0.0157 3.969 7 3.35 1.41 0.009
R8 12.7 0.5 28.575 1.125 6.35 0.25 7.94 0.3125 0.4 0.0157 4.769 8 4.3 1.3 0.02
R10 15.875 0.625 34.925 1.375 7.140 0.2812 8.73 0.3438 0.8 0.0315 4.763 10 5.99 3.285 0.03
R12 19.05 0.75 41.275 1.625 7.938 0.3125 11.11 0.4375 0.8 0.0315 6.35 9 7.905 4.48 0.052
R14 22.225 0.875 47.625 1.875 9.525 0.375 12.7 0.5 0.8 0.0315 6.35 10 10 5.85 0.07
R16 25.4 1 50.8 2 9.525 0.375 12.7 0.5 0.8 0.0315 6.35 10 10 5.85 0.085
R18 25.575 1.007 53.975 2.125 9.525 0.375 12.7 0.5 1 0.0394 7.938 9 13.2 8.3 0.091
R20 31.75 1.25 57.15 2.25 9.525 0.375 12.7 0.5 1 0.0394 7.938 9 13.2 8.3 0.096
R22 34.925 1.375 63.5 2.5 11.112 0.4375 14.29 0.5626 1 0.0394 7.938 11 16.2 10.5 0.154
R24 38.1 1.5 66.675 2.625 11.112 0.4375 14.29 0.5626 1 0.0394 7.938 12 17 11.8 0.172

About Inch Series Bearings

Inch Series deep groove ball bearings are designed for equipment that uses imperial dimensional standards. They are commonly selected when the shaft, housing, or existing bearing arrangement is based on inch measurements and a direct dimensional replacement is required.

The Inch Series covers different bearing designs and sizes, including 1600 Series models, R Series bearings, and selected metric bearing designs adapted with inch-size bores. This allows different equipment requirements to be addressed without limiting the selection to one specific bearing family.

Depending on the model, Inch Series bearings can be supplied with open, ZZ shielded, or 2RS sealed configurations. The appropriate configuration depends on the operating environment, contamination level, speed, lubrication requirements, and desired sealing performance.

For OEM and industrial applications, bearing selection should be based on the actual shaft and housing dimensions as well as load, speed, operating conditions, and available installation space. RIVER BEARING can support standard Inch Series requirements and specific OEM bearing specifications.

Inch Series Bearing Applications

Inch Series bearings are used in equipment designed around imperial shaft and housing dimensions. Typical applications include:

How to Choose an Inch Series Bearing

Choosing the right Inch Series bearing starts with the required shaft and housing dimensions. The bearing bore must match the shaft size, while the outside diameter must fit the available housing space. For applications using imperial dimensions, confirm the actual inch measurements before selecting the bearing model.

Next, consider the required load capacity and operating speed. Radial load, axial load, rotational speed, and available installation space all affect the appropriate bearing size. For applications with higher loads or continuous operation, the bearing’s dynamic and static load ratings should be considered together with the expected service conditions.

The operating environment should also be considered. Temperature, dust, moisture, lubrication, and contamination can affect bearing performance and service life. Select the bearing configuration and lubrication according to the actual working conditions.

Finally, confirm the required bearing configuration, including open, ZZ shielded, or 2RS sealed options, as well as any OEM requirements for grease, clearance, packing, or other specifications. If the required inch-size bearing is not clear, RIVER BEARING can help match the bearing to your shaft, housing, load, speed, and application requirements.

Inch Series Bearing Questions

What are Inch Series deep groove ball bearings?

Inch Series deep groove ball bearings are bearings designed around imperial dimensional standards. Their bore, outside diameter, and width are specified in inch dimensions to match equipment using inch-based shaft and housing dimensions.

The Inch Series includes different bearing types and sizes, including 1600 Series models, R Series bearings, and selected metric bearing designs adapted with inch-size bores. The correct type depends on the equipment design and required dimensions.

What is the difference between 1600 Series and R Series bearings?

The 1600 Series and R Series are different inch-size bearing families with their own dimensional ranges and model designations. Their bore, outside diameter, and width combinations are not interchangeable simply because both use inch dimensions.

When replacing an existing bearing, the bearing model, shaft size, housing size, and available width should be checked carefully. Using the correct dimensional series helps ensure the bearing fits the equipment as intended.

Can metric bearing designs be supplied with inch-size bores?

Yes. Selected metric bearing designs can be adapted with inch-size bores for specific applications. This can be useful when the existing equipment uses an inch-size shaft while the required outside diameter and width correspond to a metric bearing design.

These bearings should be selected based on the actual shaft, housing, and installation dimensions rather than by bore size alone. RIVER BEARING can support specific OEM requirements where an inch-size bore is needed with a particular outside diameter and width.

What bearing configuration should I choose for an Inch Series application?

The appropriate configuration depends on the operating environment. Open bearings can be considered where contamination is controlled and low friction or relubrication is important. ZZ shields provide non-contact protection with low friction, while 2RS contact seals provide stronger protection against dust and moisture.

The required speed, contamination level, temperature, lubrication, and sealing requirements should be considered together when choosing the configuration. For OEM applications, RIVER BEARING can also support specific requirements for grease, clearance, seals, and packing.

How do I choose the correct Inch Series bearing size?

Start by checking the shaft diameter and available housing dimensions, then confirm the required bearing width. For inch-size equipment, use the actual imperial dimensions when matching the bearing to the shaft and housing.

Load, speed, operating temperature, contamination, lubrication, and sealing requirements should also be considered. If replacing an existing bearing, checking the original bearing number and all three main dimensions—bore, outside diameter, and width—can help avoid an incorrect selection.

Need Help Finding the Right Bearing in the Inch Series?

Send us your required inch measurements to check our stock.

Ask About Inch Series Bearings →